Those who have a low budget for cutting the lumber can think about a circular saw. You can consider a circular saw as a utilitarian workhorse. However, this article is for those who are looking for buying portable woodworking for first time. Also, for those who are confused by all the different variety of tools for their small venture.
Because, you will know what is circular saw used for and how to rip narrow boards with a circular saw. We have studied 7 best steps that will help you start working with your circular saw with ease. So, let’s see what they are!
Can You Rip Boards With A Circular Saw?
We can simply answer you that “yes!” A circular saw can work fine if your rip cut need not to be that accurate. You can easily rip boards of roofing, sheet-goods, masonry and more, using your circular saw.
Its sharp blade can be a good time-saver for your project. Most incredibly, you can rip curves even once you get started with it. But, here we have a trick for you to grip the board in a plain and straight place while ripping it.
How to Rip Narrow Boards with a Circular Saw
If you are a professional and often move around with your necessary tools then, the circular saw is recommended for you. The mobility of a circular saw will be quite helpful.
What is more, if you often have to utilize your tools for your family or friends then a circular saw is undoubtedly a good option. The function of using a circular saw is not that messy for the first-time users. You can make a high performance from your circular saw following our steps given below-
Step 1: Choose the Right Platform
To choose the right platform can work as your cutting guide. And you don’t have to spend much of your time. Additionally, you will get a helping guide to cut narrow boards efficiently by corroborating this step.
We already have said that you must choose a straight and long platform for your project. Make sure the plunk of wood is pretty longer and thicker than the board. Also, you have to keep the height a bit more, compared to the work piece.
Step 2: Tighten Your Circular Saw Lone Accurately to The Slab with Clamp
It is imperative to tighten the circular saw sole accurately. Or else, you cannot work. So, make sure the circular saw is well-tightened into points on the platform. But, if you find it difficult to make it tighten then use an extra piece of wood to the circular sole. It will be then tightened automatically.
Step 3: Build a Track
Users often get confused identifying the front side of a circular saw. Generally, the front side is considered its push-inside part. So, don’t get confused with it anymore.
Positioning the front is a fundamental step because the saw will keep pushing on this side. As a result, you must take the accurate measurement of your narrow board. Be sure whether the thickness of the narrow board is perfect or not.
To make an accurate measurement, point a track in one corner and start the machine through the corner on the board. You can change the front side unless the thickness is not accurate. It is a definite tryout before going to rip the narrow boards.
Step 4: Point the Circular Saw Blade Accurately
Still you have to fiddle with a couple of things before going to rip the board. The must follow condition in this step is to put the platform and the saw-blade in a parallel way. If not, then it will interrupt on your cutting procedure.
You can make another track if facing any problem while adjusting its position. Fix a piece of wood in the front side of the saw to nourish the blade. Now turn it over and have a cut as a trial. This time you can cut anywhere to check the cut position.
So, adjustingt the saw blade is highly indispensable.
Step 5: Fiddling with the Saw-Blade Height
The height of the saw blade will help you to plunge the blade saw down the table surface properly. You can use a sliding paper as well to bring the accurate adjustment of the height.
And, that sliding paper has to be passed under the border of the narrow board. It will confirm you a clear sign of accurate height of the board.
Place the saw-blade on the exterior to adjust its height. Now, take a lean paper to put it under the blade. Have a close look whether the paper can pass under the blade. Your adjustment is done if the paper can pass under the saw-blade.
Step 6: Readjusting
You have to make sure the position of the body and the sole of circular saw can be in angled position.
Step 7: Begin to Rip
You need to push the saw-trigger and keep it locked. Now nourish the blade with the wood piece bit by bit. If you think that all the mentioned steps above are done, then you can start ripping confidently-Portable Table Saw For Fine Woodworking .
Conclusion
You will find the circular saw much popular all around the world because of its mobility and versatility. It is popular among the professionals especially who often move around with their tools.
However, you already have known about the vast self-explanatory of a circular saw. Besides, you have learned how to rip narrow boards with a circular saw and other necessary things about it. Expectantly, we could remove your confusion why to choose a circular saw than other kind of tools.
